Pallet Utilization & Dock Telemetry

Ship less air.
Turn docks faster.

PalletMetric measures how full every pallet and trailer actually is, how long each truck sits at your dock door, and what that costs you in extra runs. Built for 3PL warehouses and regional distributors that plan outbound loads every day.

We reply from garrett@palletmetric.com, usually within one business day.

REST API & CSV manifest import
Sub-second load calculation
TLS 1.3 encrypted telemetry
Hands-on Early Access onboarding
Pallet Load & Weight Distribution · preview calc 0.4 ms
SIDE · 0 in
lightheavy
Gross load—
Footprint fill—
Stack height—
CoG offset—
Cube vs envelope—
Status—
TLS 1.3 encrypted telemetry REST API & CSV manifest import Sub-second load calculation Early Access onboarding
Four modules · one dock floor

What PalletMetric
watches for you

Each module works on its own data feed — a CSV export, a WMS webhook or an EDI document — so you can start with the one that hurts most and connect the rest later.

M-01 · DOCK TURNAROUND TRACKING

See which door is holding the yard hostage — while it is still happening.

Check-in, door assignment, first scan, last scan and gate-out are stitched into one dwell timeline per trailer. You set the target turn time per carrier or load type; PalletMetric flags doors that drift past it.

06:0008:0010:0012:0014:00
DOOR 03
TRL 4471 · 52m
TRL 8820 · 61m
DOOR 04
TRL 1093 · 2h 09m · over target
DOOR 07
TRL 3307 · 43m
idle 48m
TRL 5512
DOOR 09
TRL 6604 · 71m
TRL 2290
DOOR 12
idle 1h 22m
TRL 7718 · 55m
DOOR 14
TRL 9031 · 58m
TRL 4106 · 49m
DOOR 15
idle 34m
TRL 3378 · 1h 38m · over target
within targetpast targetdoor idle
M-02 · DIMENSIONAL WEIGHT AUDIT

Catch billable-weight gaps before the carrier invoice does.

Compares declared weight against dimensional weight per pallet and flags lines where the divisor flips the charge.

PLT-20418 48×40×62 in declared 612 lb dim /139 858 lb ▲ +246
M-03 · ASN / EDI MANIFEST SYNC

Your load plan and your ASN tell the same story.

Imports EDI 856 / 940 / 945 or CSV manifests, matches them to built pallets and highlights SSCC or quantity mismatches.

HL*3*2*P~ // pallet MAN*GM*00012345600001842~ SN1**36*CA~ ≠ built 34
M-04 · CARRIER DETENTION ALERTS

Know the detention clock is running before the bill arrives.

Set free-time windows per carrier agreement. PalletMetric warns your dock lead as a trailer approaches the limit and keeps a timestamped record you can bring to a detention dispute.

OVER
Door 04 · TRL 1093free time 2h 00m · elapsed 2h 09m · carrier RDX-12
+9 min
T-15
Door 09 · TRL 2290free time 1h 30m · elapsed 1h 15m · carrier MWL-04
15 min left
OK
Door 12 · TRL 7718free time 2h 00m · elapsed 0h 55m · carrier RDX-12
65 min left
Trailer load optimizer · model

How many trucks
are leaving half empty?

Move the sliders to your monthly volume. The model compares typical floor-loaded trailers with planned loads that use every floor position and stack light pallets where weight allows.

4,800
20030,000
780 lb
200 lb2,200 lb
$1,350
$300$4,000

Model assumptions — 53′ dry van, 26 floor positions, 43,500 lb legal payload, 3,489 ft³ interior. Baseline: 21.5 positions used on average, no stacking. Planned: 25 positions, stacking share falls from 50% at 300 lb to 0% at 1,500 lb. Illustrative only — your real numbers come from your own manifests during onboarding.

Freight spend avoided / month$0
Per year$0
Today
—
Planned
—
Under-filled runs eliminated0—
Empty trailer cube avoided0 ft³per month
Pallets per trailer—today → planned
Trailer cube used—today → planned

Pricing · Early Access rates

Priced by pallets moved,
not by seats.

TIER SD-1

Single Dock

≤ 2,500 pallets / month
  • 1 warehouse location
  • Pallet load & weight distribution analytics
  • Basic manifest export (CSV, PDF)
  • CSV manifest import
  • Email support — support@palletmetric.com
$89per month
Start Early Access
MOST DOCKS
TIER RH-5

Regional Hub

≤ 15,000 pallets / month
  • Up to 5 warehouse locations
  • API & webhook integrations with your WMS
  • Dock dwell time tracking & turnaround targets
  • Carrier detention alerts
  • Everything in Single Dock
$240per month
Start Early Access
NETWORK TIER · MF-∞

Multi-Facility 3PL

For 3PL networks running several clients across several buildings. Unlimited sites, a dedicated EDI sync channel, and stacking rules written for each client's freight.

  • Unlimited warehouse locations
  • Dedicated EDI sync channel
  • Custom stacking & load-building rules
  • Everything in Regional Hub
$590per month
Talk to Garrett

Prices in USD, excluding applicable taxes. Early Access customers keep their rate for the first 12 months.

Integration FAQ

Questions your
WMS team will ask

Product & Early Access
garrett@palletmetric.com
Technical support
support@palletmetric.com
Q-01Which WMS platforms can PalletMetric connect to?
Any WMS that can either export a file or call a URL. During Early Access we connect through three routes: scheduled CSV exports dropped to SFTP or uploaded in the app, outbound webhooks from your WMS on shipment and pallet events, or direct calls to our REST API. We do not ship pre-built vendor connectors yet — we map your fields with you during onboarding.
Q-02What data format do you expect for manifests and pallets?
At minimum, one row per pallet with an ID (SSCC or your own), length, width, height, gross weight and the shipment or load it belongs to. JSON over the REST API uses the same fields, e.g. {"pallet_id","dims_in","weight_lb","load_id"}. For EDI, we read 856 (ASN), 940 and 945 documents. Metric units are accepted and converted.
Q-03How does dock dwell time get captured?
From timestamps you already have: gate check-in, door assignment, first and last pallet scan, and gate-out. These can come from your WMS, a yard management tool, or a CSV export. No hardware is required. If an event is missing, the timeline shows the gap instead of guessing.
Q-04What does an Early Access launch look like?
Week 1: a 45-minute call, then you send a sample of recent manifests and dock timestamps. Week 2: we map fields, load historical data and walk your team through the first load and dwell reports. After that you run it on live data, with direct access to the team by email. Telemetry between your systems and ours is encrypted in transit with TLS 1.3.

Privacy Policy

Effective November 18, 2026 · PalletMetric Software Corp.

1. Who we are

PalletMetric Software Corp. ("PalletMetric", "we") operates palletmetric.com and the PalletMetric platform. Our address is 1600 Broadway, Suite 1600, Denver, CO 80202, United States. Privacy questions: garrett@palletmetric.com.

2. What we collect

This website does not use advertising or cross-site tracking cookies. The demo form on this page does not store your email on our servers; it opens a pre-filled message in your own email client.

3. How we use it

To respond to inquiries, provide and support the platform, calculate the analytics you request, secure our systems, and meet legal obligations. We do not sell personal information.

4. Customer data

Operational data uploaded by a customer belongs to that customer. We process it only to provide the service under our agreement with them and do not use it to build products for other customers.

5. Sharing

We share data only with service providers that host or operate the platform for us (for example, cloud hosting and email), under contractual confidentiality obligations, or where required by law.

6. Security

Telemetry and API traffic are encrypted in transit using TLS 1.3. Access to customer data is limited to staff who need it to operate and support the service. No system is perfectly secure, and we will notify affected customers of a security incident as required by law.

7. Retention

We keep inquiry emails while the conversation is active and for a reasonable period after. Customer data is kept for the term of the agreement and deleted or returned on request after it ends.

8. Your choices

You can ask to access, correct or delete your personal information by writing to support@palletmetric.com. Residents of certain U.S. states, including Colorado and California, may have additional rights under state law, which we honor.

9. Changes

We will post updates on this page and change the effective date above.

Terms of Service

Effective November 18, 2026 · PalletMetric Software Corp.

1. Agreement

These terms govern your use of palletmetric.com and the PalletMetric platform provided by PalletMetric Software Corp., 1600 Broadway, Suite 1600, Denver, CO 80202, United States. By using the service you agree to them on behalf of yourself and the organization you represent.

2. Early Access

PalletMetric is offered as an Early Access (v1.0) release. Features may change, and some functionality may be limited or unavailable while we develop the product. We will give reasonable notice of material changes that affect paid features.

3. Accounts and use

4. Fees

Subscription fees are as listed on the pricing page or in your order. Monthly plans renew each month; annual plans are billed upfront at the discounted rate. Fees are non-refundable except where required by law or stated in your order.

5. Your data

You keep all rights to the data you upload. You grant us a limited license to process it to provide and support the service. Our handling of personal information is described in the Privacy Policy.

6. Analytics are decision support

Load plans, weight distribution, dimensional weight and savings estimates are calculated from the data you provide and are intended to support — not replace — your team's judgment. You remain responsible for load securement, legal weight limits and carrier requirements.

7. Disclaimer and liability

The service is provided "as is" during Early Access. To the extent permitted by law, PalletMetric's total liability for any claim is limited to the fees you paid in the 12 months before the claim, and we are not liable for indirect or consequential damages.

8. Termination

You may cancel at any time; access continues until the end of the paid period. We may suspend accounts that breach these terms.

9. Governing law

These terms are governed by the laws of the State of Colorado, United States.

10. Contact

garrett@palletmetric.com · support@palletmetric.com